This is the submission of Assignment 4 "Connect and Combine - Chindogu" for the team The eCreatives for Crash Course in Creativity held by Venture Lab, Stanford University.
I have chosen two simple hairbands and combined them with a saucer using safety pins to create a cup-saucer combination to serve coffee/drinks and snacks together. The unique advantage being that you need only a small foot print and a combined cup-saucer. It also prevent spilling of the drinks. Specially useful for having a coffee at work table or moving car.
1. Assignment 4 of Crash Course in Creativity
at Venture Lab, Stanford University
Team
The eCreatives
Ms. Dolly Bhasin
Combining Cup-Saucer with
Hair bands & Pins
Submitted on 18th
May, 2013
2. Combining Cup-Saucer with Hair bands
Normally when I take Tea or coffee or any soft-
drink, I like to take some biscuits or cookies with
the same
However, I would require two separate utensils -
cup/glass and saucer for the same.
Also, some times, I take my Coffee at work table
or driving and space is limited for two separate
utensils with an added risk of spilling the drink.
So, I worked around this adaptation using
commonly available things.
4. Combining Cup-Saucer with Hair bands
Here is my unique combination –
Cup + Saucer with 2 hair bands (ordinary
stretchable colored bands) and a few safety pins
(big size).
Through the next couple of slides I would illustrate
how easy it is to make and use this connect and
combine new adaptation to serve the purpose.
6. Step 1
Take 2 hair bands (one small and one slightly
bigger) with firm grip
Take a saucer which has a bigger diameter than
the cup/glass and is slightly deep.
You will need about 5-6 Safety pins.
Connect both the hair bands with the safety pins
(all the safety pin heads pointing outside the
bigger band)
You would get two concentric circles held
together with these pins
8. Step 2
Hold the hair band duo with the outer band
(red) and fit it on the saucer carefully while
keeping the safety pins straight
9. Step 3
Our saucer is now
ready to hold the
cup
Gently ease the
cup in the inner
band by slightly
expanding it
10. Step 3
Or we could have
this saucer hold
the glass.
Gently ease the
glass in the inner
band by slightly
expanding it
11. Step 4
Your snacks can be
added to the saucer
between the two
bands holding the
glass and the saucer
The safety pins can
act as separators for
your snacks
12. Step 4
Your snacks can be
added to the saucer
between the two
bands holding the
cup and the saucer
The safety pins can
act as separators for
your snacks
13. Viola!
Your Cup-saucer
combine with hair bands
is ready which allows
a single small footprint
unit for your coffee or
drink and snacks
Prevents spillover by
holding the glass/cup
firmly
Can also be used in a
moving car
14. Thanks for Watching this DIY slideshow!
If you like this
“unuseless”
Combination, please
try it our TODAY!
It only take 1-2-3-4
steps and 5 minutes
You could also share
this DIY presentation
with your friends, by
clicking here.
15. Note
This is an original idea by me, which I use quite often
at work and sometimes while moving in car.
I have not as yet used this adaptation while at driver
seat, but it works very well when I am at the back/side
seat and the car is moving without spilling.
All photographs have been taken my me except hair
band and safety pins (taken from internet)
You are free to view, copy and use this adaptation for
your personal use. I encourage its redistribution to
anyone who could benefit from same.