Based on my 8 years of experience in Oil & Gas industry I'm trying here to introduce you to the most of what you may need to know about Process Control as a chemical engineer. This is an introduction to understand more about :- -Control Concepts -Feedback Control Loop -Sensors -Signal Transmitters -Controllers -Final Control Element -Control Loop Modes This is 1 of 4 presentation on this topic. All the data and the illustrative figures presented here can be found through two reference books:- ENGINEERING DATA BOOK by Gas Processors Suppliers Association Process Technology - Equipment and Systems by Charles E. Thomas Thank you.

1. Process Control
An introductory guide to Control Concepts
for Chemical Engineers (1 of 4)

31. Thank You

32. • Professional Experience
‐ Process Engineer - Methanex Corporation.
‐ Process Engineer - GAP Tech.
‐ Process Engineer - Assiut Oil Refinery.
‐ Process Engineer - Abu Zaable Fertilizers.
• Academic Background
‐ M.Sc. in Chemical Engineering.
‐ B.Sc. in Petroleum Refining and
Petrochemical Engineering.
• Meet Hassan

33. • Other Topics
‒ Compressors ‒ Isomerization
‒ Steam Turbines ‒ Reforming
‒ Pumps ‒ Hydrocracking
‒ Electric Motors ‒ Hydrotreating
‒ Gas Turbines ‒ Catalytic Cracking
‒ Pipeline Sizing ‒ Alkylation
‒ Heat Exchangers ‒ Delayed Coking
‒ Fired Equipment
‒ Valves
‒ Columns

34. HASSAN ELBANHAWI
Process Engineer