3. Historical and Vanguard
Finetornos® - Hernandes Fim & Cia. Ltda. Is a company of metallurgic sector
acting in the machining division and has established its activities at 1976.
Since the beginning of its activities, Finetornos supplies to
large-size corporations, multinational with competitive and
innovative features and sustainable growth
provided by technologies, machines
and development of trained workforce.
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED
OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
4. Historical and Vanguard
The main focus is the achievement of our clients
offering integrated engineering solutions, which add
value to the goals and objectives of the customers,
participating and following all the stages of product
design.
Finetornos® has a market oriented organization,
based on organizational culture and climate that is as
facilitators of this process, promoting and encouraging
the exchange of ideas between sectors, keeping the
internal policy, supported by fidelity acquired by the
good relationship with its suppliers.
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
5. Mission
“
“ To be a company that improve its concepts and features,
”
synchronized with the market and the acting of its customers,
which encourage the industrial technologic application, and is
aware of life quality and environment.”
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
6. Quality Policy
“
“ Offer Competitive Products, with Quality,
”
Punctuality and continuous
Improvement. “
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
7. Value Visions
• Integrity
• Social
• Learning
•Total Quality
• Partnership
• Uniqueness
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
8. Objectives
“ Be a competitive and profitable company in our segments of operation, both
domestically and abroad, being a reference and option for our current
and future customers to be prospected. “
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
9. Facilities and New Investments
02 Vertical Machining Centers Mazak Nexus
VCN 510-C II High Speed 15.000 RPM 4 Axis
02 Vertical Machining Centers Romi D 800
7.500 RPM 4 Axis
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
10. Facilities and Structures
Offering machinery and equipment of last generation:
CNC CAD CAM 3D, Machining Centers 03 e 04 axis high speed, Centers of
turning machine , Processed by software CAD CAM 3D VISI, being this a
general system for the global market, providing converters DXF, IGES VDA
and STEP, with direct interfaces with leading
software industrial projects, including:
• CATIA
• PRO/E
• AUTOCAD DWG
• ACIS
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
11. Facilities and Structures
Our company has a manufacturing structure, managed by modern
management systems and planning software integrated with ERP / MRP,
synchronized with control system processes and services and the planning
and production control, which uses the concept of sequencing in finite
capacity, fueled by collectors sector data by barcode.
Metrology complete Climatized and well equipped
with three-dimensional measuring machines, with
software measurement by comparison, offering a
portfolio of a modern coordinate measuring three-
dimensional Mitutuoyo machine model Crysta
BND - CC 9168 - CNC.
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
12. Structure and functional framework
Finetornos appreciates the low staff
turnover by encouraging individual efforts
to study and retraining, completing the
learning through internal and external
training. Promotes and encourages
people to achieve the objectives and
results of the company, encouraging the
challenges and responsibilities that
provide professional growth.
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
13. Business Segments
Aerospace: 75%
Automotive: 15%
Industrial: 10%
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
14. Focus of Action
Finetornos is focused on 3D CAD CAM CNC
Milling Machining Centers 3 and 4 axis high
speed and centers of turning machine ,
focused on production and development of
parts of complex geometries in different
materials such as aluminum, steel, 4130,
4140 T & R, stainless steel, stainless 15-5
PH, stainless 13-8 PH-MO, titanium, Inconel,
non-ferrous alloys , thermoplastics and
nodular cast iron, forged steel castings,
nonferrous metals and alloys.
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
15. Aerospace
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
16. Aerospace
We produce machined parts and
mechanical structural products such as:
Sleepers, panels, frames, supports,
linings, Reinforcements, Pin lock,
Platform, Hardware, Rails,
Connections, Support Joint-Actuator,
Bushings, Shafts, Spindles, Amendment Sector,
Ramp Guide, Rod, Stabilizer Tip, among many others.
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
17. Aerospace
The aircraft parts produced by Finetornos
are applied in practically the whole aircraft,
such as:
• Drives
• Landing Gear
• Doors
• Stabilizers
• Entry Ramps
• Seats
• Floors
• Door components
• Wings
• Supports Avionics
• Flaps
• Linings
• Fuselage
• Main body of plane
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
18. Aerospace
We produce parts, assemblies and subassemblies for the aeronautical
sector, finished with treatments and coatings:
• Thermal
• Passivation Mounting subsets
• Chromic Anodizing
• Driving / Sealing Flange Nut
• Chemical Conversion / Alodine
• Mechanical Assembly
• Phosphating
Inserts, Kneecaps, Bushings, Bearings
• Laboratory
• Penetrant Liquid
• Painting
• Sulfuric Anodizing
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
19. Aerospace
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
20. Aerospace
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
21. Aerospace
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
22. Aerospace – IQ June 12
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
23. Aerospace – IQ May 12
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
24. Aerospace – IQ April 12
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
25. Automotive / Industry
We operate in the production of low and medium
demand and in the development of prototypes, being
the prototype, the embryo to develop concepts of
current and new products, as well as an important
tool in the nationalization of parts and components.
We anticipate to our customers the studies and tests
of assembly and durability.
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
26. Automotive / Industry
Rotor
OIL & GAS
Turbines
Blades
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
27. Automotive / Industry
Subsea
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
28. Automotive / Industry
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
29. Automotive / Industry
The differential of Finetornos is the reliability
and punctuality of the shorter term, linked to
the quality management system Finetornos,
ISO-9001 - version 2008 and ISO-9100-AS,
where from the 3D design of the customer,
we generate the design and programming 3D
CAD CAM development processes and tools,
materials, testing and metallographic
laboratory reports including innovation, in a
constant search for value and complete
solution to our client.
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
30. Automotive / Industry
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
31. Automotive / Industry
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
32. Innovations
3D Design
Casting Machined Part
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
33. Innovations
Rapid Prototyping Stereolithography
Stereolithography
model
Casting Machined Part
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
34. Schedule of productive projects
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.
36. Certificates
Finetornos ® is considered a synonym of quality due to the constant effort
in improvement of working techniques, to ensure complete solution and
overcoming the expectations of our supplies.
Operates with the quality management
system certified by BRTUV in
standards: ISO 9000, version 2008
and ISO-9100-AS (NBR15100) quality
management system aerospace.
THIS INFORMATION IS PROPERTY OF FINETORNOS AND CANNOT BE USED OR REPRODUCED WITHOUT WRITTEN CONSENT OF THE SAME.